Wireless Split type Light Transmittance Meter Car Window Tint Light Tester

Description

Wireless Split type Light Transmittance Meter Car Window Tint Light Tester
Introduction
LS110 wireless split type light transmittance meter is mainly used for light transmittance detection of transparent materials such as glass, acrylic and film. This car window tint light transmittance meter has three independent test units. The displayed visible light transmittance is the average of three measurement data. The instrument use a visible light source to illuminate the tested transparent materials. The sensor detects the incident light intensity of the light source and the light intensity after passing through the tested transparent materials, expressed as a percentage.
Application
The LS110 portable light transmittance tester uses a split design. It consists of two parts: the main part (PART I) and the auxiliary part (PART
Ⅱ
). The main and auxiliary parts have super strong magnetic force and can be automatically closed together. It is widely used in the transmittance test of installed materials such as automobile front shield and curtain wall glass.
Parameters
Spectral range
380nm-760nm full wavelength, in line with
CIE photopic luminosity function
Measurement accuracy
better than ± 2% (colorless and uniform
transparent materials)
Resolution
When the measured value is the resolution is 0.1%;
for other ranges,the resolution is 1%
Test samplesize
bigger than 40mm × 40mm
Power supply
Built-in lithium rechargeable battery
Dimension
130mm × 70mm × 84mm (L*W*H)
Weight
630 g
Characteristics
1. The split design of the main and auxiliary machines is convenient for on-site measurement, such as the transmittance measurement of the car front windshield and the building glass.
2. It adopts three-way visible light source measurement. The displayed light transmittance is the average value of three-way measurement data. The measurement result has strong anti-interference ability.
3. The car window tint visible light transmittance meter has built-in rechargeable lithium battery. There is no need to replace the battery, the standard one-to-two USB charging cable can be used to charge the main and auxiliary machines at the same time. The instrument is easy to use and environmental protection.
4. The laser alignment function ensures that the main and auxiliary machines are accurately aligned during the measurement process, thereby ensuring the accuracy of the measurement.
5. With test data lock function (HOLD), the light transmittance meter is convenient for data reading.  The data remain on the interface after taking away the test materials.
Packaging Details
No.
Description
Quantity
Unit
1
LS110 transmission meter
1
pcs
2
User Manual
1
pcs
3
Certificate / warranty card
1
pcs
4
Charger
1
pcs
5
One to two Charge cable
1
pcs
6
Packing box dimension25*21*7 cm
（
L*W*H
）
1
pcs