10" Archer Chainsaw Chain Worx 50033429 WG322 WG322.9 WG323 WG323.9 10" Cordless

Description

This is (1) loop of very high quality professional Archer brand Saw Chain. The chain is 3/8LP pitch, .043 gauge and has 40 drive links. This chain works on many pole saws, pruners and chain saw that are using a 10" guide bar.
The chain replaces part numbers 90PX040G N4C-40E 61PMN-40
This 10" Archer chainsaw Chain is 3/8" LP (low pro) .043 gauge and has 40 drive links:
Archer replacement 10" saw Chain for Worx 50033429 WG322 WG322.9 WG323 WG323.9 10-in Cordless 20V 9040
***This chain is a non-safety professional chainsaw chain***
Note: All Chainsaw chains are a called length, in order for your replacement chain to fit you must always match the
pitch, gauge and drive link count
!
The
drive link count
is the number of drive links in the loop of chain, the drive link is the triangular part of the chain that rides in the groove of the guide bar. The
gauge
is the width of the opening of your guide bar groove (or the thickness of your drive link) and the most common gauges are .043, .050, .058, and .063.
Pitch
is the actual measured distance between any three rivet heads on the chainsaw chain divided by two, the most common pitches are ¼”, 3/8LP(low-pro), .325, 3/8” and .404. The pitch and gauge of a chain are not easily measured so the pitch and gauge of your chain is best determined by using the chain manufacturing codes from the old chain that are found stamped on the drive links (and all the chain manufacturers use different codes) also many times the pitch, gauge, and drive link count are found stamped on the tail end of the guide bar. If you need any help in determining what size chain you need please contact us.
Archer Saw Chain, Archer Guide Bars and Archer Accessories are known for quality and sold world wide!